The operating side, the potential for the individualization ZCS FSWs customizable displays the selectable PSWs. The inten" /> The operating side, the potential for the individualization ZCS FSWs customizable displays the selectable PSWs. The inten" />

NCS Expert Car/Key Profile

Posted by genti 21/11/2017 0 Comment(s)

Car Key memory:

A here’s a guide to car/key profile and button in NCS:

The typical sequence for the customization is as follows:

1. Button Select the "individualization".

-> The operating side, the potential for the individualization ZCS FSWs customizable displays the selectable PSWs. The intended state of PSWs is marked with a prefix 'S'.

2. Button Select the "READ".

-> The actual state of the customizable PSWs FSWs is determined and with a leading 'I' marked.

3. Button Select the "TAKE OVER".

-> The currently selected PSW becomes the new target value for the vehicle in the list of gänderten PSWs.

4. Button select "BROADCAST".

-> The controllers of the vehicle in which PSWs have changed are encoded. Amended by promoting PSWs the list of changed PSWs.

Now let’s move back to coding. Once you’ve made the changes you want, save the file.

pastedGraphic_12.png

Choose file and click save. (common mistakes here is saving the .man folder incorrectly as a .txt file, make sure when saving you have a .man file, not .man.txt! will not work. If problem saving, choose instead "save as" and where box says file type. Choose "all files" not text.

pastedGraphic_13.png

Now click Load Profil

pastedGraphic_14.png

Choose the Godfather Profil 

pastedGraphic_15.png

Now press Process ECU so we can tell NCS Expert what module we would like to code to.

Choose the Module and press ok. (Make sure this is same modules you read from!)

Press Ok.