VXDIAG VCX NANO FORD

VXDIAG VCX NANO FORD

VXDIAG VCX NANO for Ford/Mazda 2 in 1 with IDS V100.01
 
New Arrival VXDIAG VCX NANO for Ford/Mazda 2 in 1 with IDS V100.01
One device support both Ford and Mazda
Support vehicle till 2015 year
 
 
Top 5 Reasons to get VXDIAG VCX NANO:
 
1. FORD IDS Version: V100.01, Mazda IDS Version: V100
2. Perfect replacement for Ford VCM 2
3. Support Multi-Languages: English/German/French/Italian/Spanish/Dutch/Slovenian/Finnish/Danish/Norwegian/Portuguese(European)/Portuguese(Brazil)
4. Update by CD with unlocked firmware
5. Support both new and old vehicles.
 
Notice: Can't Support Ford F-150
 
VXDIAG VCX NANO Requirement on Computer:
 
1. Computer has at least 4GB Memory
2. Computer need produced after 2000 year, too old computer can not run the software.
 
VXDIAG VCX Nano Description:
 
VXDIAG VCX NANO is an OEM diagnostic interface for the vehicles of Ford and Mazda. It can be compatible with OEM software of Ford IDS and Mazda IDS VCX Nano accord with standard of SAE-J2534(Pass–thru), can be connected with computer through high speed USB2.0 and Bluetooth to be compatible with most vehicle’s communication protocols. It will be used widely by car manufactures to make ECU online diagnosis and reprogramming. It also supports the third party and OEM original diagnostic software. VXDIAG VCX NANO Ford/Mazda OEM diagnostic tool is the update version of Ford/Mazda VCM2 Scanner.VXDIAG VCX NANO IDS
diagnostic tools can work on new and old Ford and Mazda till year 2015 with multi-language available and update via CD with firmware unlocked. 
 
VXDIAG VCX Nano Function:
 
1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
2. Live Data-stream with Recording & Playback Functions for Main ECUs
3. Read & Clear Diagnostic Trouble Codes (DTCs)
4. Set, Adjust or Remove Speed Governors
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Program New Keys
11. DPF Regeneration
12. Brake Bleeding
13. Injector Coding
 
 
Experience of Quickly Guide for Success:
 
Use Virtual machine installer found on Ford IDS CD V97, install VM then create a VM
Then on the virtual machine
Install calibration from V81 CD
Install V91 from V97 CD and reboot without opening software
Once rebooted open software and agree to 3 day licence, enter any details
Close software and Install V96 and reboot without opening
Once rebooted you can open software
Install software on CD V97 for the VX device
At this point I just installed deep freeze found on cd V97

 
Functions tested successfully:

Record and play back live data for ABS, PCM…tested ok 
Program and Install new ECUs (PCM, ABS)…tested ok 
Read and Clear DTCs…tested ok 
Program New Keys for Mazda 6…tested ok
Set, adjust or remove speed governors…tested ok 
DPF Regeneration…tested ok 
Automatic vehicle recognition…tested ok 
All other dealer functions…tested ok 
Reset steering angle…tested ok 
Find guided fault…tested ok 
Injector Coding…tested ok
 
 
Package List:

1pc x VXDIAG VCX NANO Main Unit
1pc x USB Cable
1pc x Carry Case
1pc x CD