Normal OEM CAT ET3 Adapter Ⅲ P/N 317-7485 without WIFI

Normal OEM CAT ET3 Adapter Ⅲ P/N 317-7485 without WIFI

USB Cable (Connect device to your computer)
 
J1939/J1708 Cable (Connect device to your truck)
 
CAT ET 2015A software disc with active tool (Unlimited, install in more laptop)
 
Communications Adapter 3 Description:
 Communications Adapter 3 is the latest generation of the Communication Adapter group, and replaces the  Comm Adapter II. This is the only recommended communication device for ET 3,and the only data link device that will allow you to properly communicate with a CA engine on dual datalinks. This function is needed for some  ET (Electronic Technician) functions.

 Communications Adapter III Feature:
1. WiCaterpillar Communication Adapter3
2.Allows communication between service tools and engine controls using various data links such as J1939/11, DeviceNet
(future release), CT DataLink, and J1708 (ATA) vehicle networks;
3.Flash program allows adapter firmware upgrades as additional features become available;
4.Uses J1939/11, high-speed data link (part of ADEM III controls), substantially reducing flash times;
5.Automatically selects J1939/11 when flashing the engine (reduces the flash time approximately 80%, from 14 minutes to 3 minutes).

 Communications Adapter III Function:
1.ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3.Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4.Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5.To help dealer identify problems without visiting machine.
6.Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Showswhen problem occurred and how often it happened.
7.Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubeshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the "How To" around the software.

Note:
1.Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator.
2. "ET Trainer" is now included in ET Program. It allows Users to train and practice using  ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of  ET.
 

Communications Adapter III Package
CAT Comm Adapter III
CD for installing the drivers
USB Cable
J1939/J1708 Cabl